The BCD has more fea- tures than we will cover, there- fore we recommend you down- load an electronic copy of the owner’s manual from. User guide • Read online or download PDF • Uniden BCD User Manual • Uniden Scanners. User manual for the device Uniden BCD. Online user manual database.
|Published (Last):||4 September 2014|
|PDF File Size:||7.59 Mb|
|ePub File Size:||6.29 Mb|
|Price:||Free* [*Free Regsitration Required]|
Basic Operation This section is your main reference for using the scanner once you have programmed conventional and trunked systems. The temporary talkgroups used for patches are usually manuao in AFS code xxx, and sometimes xxx.
Setting Beep Alert For Trunk Scanning, a good squelch setting is critical.
Uniden BCD user manual – – Solve your problem
However, some signals are identifiable by the scanner as data signals, and you can set the scanner to automatically skip these channels. Unlocking All Talkgroups Programming Bank Information RANGE Select, then follow the prompts to manuual the lower and upper frequency limits for the search range.
Searching for Trunk Systems 1: These systems are briefly describedhere. Some counties are further subdivided, in which cases, the first digit will be 0 for all subdivisions in the county and each subdivision will be labeled The scanner sounds each of the three alert types repeatedly. Searching For Active Talkgroups id Search I have accidently hit the wrong button on my scanner; how do i get back the bank with the fire channels which is bank 1? Move to a location where the signal strength is strong.
You hear the control data and the scanner displays every talkgroup ID as it becomes active in the system.
If you want the scanner to beep three times to alert you when the talkgroup is active, select 3: This section describes how to store known frequencies into conventional channels. If the scanner finds any non-locked-out ID when it checks the control channel, you will hear it. E To connect the Scanner to a PC, plug the scanner end of the supplied RSC cable into the remote port which is on the side of the scanner.
OFFData skip is turned off.
Then, use the scroll bar to select the size code for each block. For complete information about a menu option, see the section referencing its use.
Uniden Scanner BCD User Guide |
Extended high-volume listening can lead to permanent hearing loss. When you select this option, the scanner only opens squelch when a matching CTCSS tone is present on the frequency. Change to a Type 1 Scanner setup. Listen to this, or try searching another service for something more interesting, while you review the rest of the manual. ON Talkgroups are rounded down to the next multiple of Press 1 or highlight 1: I have changed the battery but this Thus, it is possible for a weather broadcast that can be received across many counties to be targeted to a single county.
These systems encode all control information as digital subaudible data that accompanies each transmission, so there is no separate control channel.
Use the scroll bar to select the channel you want to tag, then press E. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Uniden BC296D User Manual
Each bank can store up to talkgroups in 10 ID groups of 10 talkgroups each. Enter the frequency you want to program, then press E.
Listening To The Input Channel PLAN4 Use if the highest frequency in the system is below MHz and if the last three digits end in,,or Selecting Talkgroup Lists To Scan Enter the frequency and alpha tag for the channel. Scanning Programmed Channels However, most systems only use one configuration.